Skip to the beginning of the images gallery

DOMESTIC WASTEWATER TREAT. PLANT SBREM 10 D2.2

0PK00996

Description

Domestic Wastewater treatment plant type ACO SBREM 10 D2.2 by means of a Sequential Biological Reactor (SBR) manufactured at glass-reinforced plastic (GRP), in vertical format for underground installation. With treatment capacity for 10 users and a hydrau

Characteristics

Benefits

Compact water treatment plant
Easy installation and maintenance
Low power consumption
No recirculation is required to keep the biomass in the reactor or even for the nitrification-denitrification process
The position of the pump avoids the outflow of possible floats

Areas of application

Equipment for the treatment of domestic wastewater by oxidation in small and medium-sized communities

Decanter

Anaerobic degradation of the accumulated organic matter

Reactor

Removal of organic matter and nutrients
Including recirculation system by airlift
Including evacuation pump
Includes airlift compresor for 1-3mm bubbles

Single-phase current 230 V

Installed power 0,25 kW

COD (mg/l)<61

SS (mg/l)<15
Effluent qualities
BOD5 (mg/l)<15

Operation

The system is carried out in the following stages:
1 - Primary settling tank: sedimentation and settling of the influent. The water is pumped to the reactor in a programmed way at the beginning of a cycle. Its operation is not affected by the hourly disc
Filling: reception of a certain volume of water from the primary settling tank by pumping.
Reactor: in the reaction stage, aerobic phases (presence of oxygen) are combined with anoxic phases (without oxygen) which allows the removal of organic matter and nutrients.
Sedimentation: during this phase and in the absence of agitation and aeration, the sludge settles, leaving the sludge at the bottom and the clarified at the top.
Emptying: the treated water is pumped out.

Technical Specifications