Skip to the beginning of the images gallery

DOMESTIC WASTEWATER TREAT. PLANT SBREM 500 D3

0PK00502

77.014 €

Description

Domestic Wastewater treatment plant type ACO SBREM 500 D3 by means of a Sequential Biological Reactor (SBR) manufactured at glass-reinforced plastic (GRP), in horizontal format for underground installation. With treatment capacity for 500 users and a hydraulic demand of 75 m³/day, with high purification performance in compliance with RD 509/1996. Solution consisting of 2 equipment, a first decanter of dimensions 11600mm in lenght, 3000mm in width and 3137mm in height. With inlet and outlet connection DN250 and with 2 access covers inside the equipment the dimensions Ø567 realised at polyethylene. Followed by a reactor the dimensions 11600mm in lenght, 3000mm in width and 3250mm in height. With inlet and outlet connection DN250 and with 2 access covers inside the equipament de dimensions Ø567 realised at polyethylene. Total installed power: 9,5kW. Weight: 2545kg.
Code:0PK00502

Characteristics

Low power consumption

No recirculation is required to keep the biomass in the reactor or even for the nitrification-denitrification process
The position of the pump avoids the outflow of possible floats
Compact water treatment plant
Easy installation and maintenance
Benefits

Areas of application

Equipment for the treatment of domestic wastewater by oxidation in small and medium-sized communities

Decanter

Anaerobic degradation of the accumulated organic matter
Includes flow regulating pump

Removal of organic matter and nutrients

Including recirculation system by pump
Includes turbine type compresor for 1-3mm bubbles
Reactor

Electrical panel and PLC

Three-phase current 400 V
IP - 44 protection
Installed power 9,5 kW

BOD5 (mg/l)<15

COD (mg/l)<61
SS (mg/l)<15
Effluent qualities

Effluent qualities

BOD5 (%) = 92
COD (%) = 90
SS (%) = 94
The equipment is designed to treat waste water with the following composition: BOD5: 400ppm, COD: 600ppm, SS: 450ppm

Reactor: in the reaction stage, aerobic phases (presence of oxygen) are combined with anoxic phases (without oxygen) which allows the removal of organic matter and nutrients.

Sedimentation: during this phase and in the absence of agitation and aeration, the sludge settles, leaving the sludge at the bottom and the clarified at the top.
Emptying: the treated water is pumped out.
Operation
The system is carried out in the following stages:
1 - Primary settling tank: sedimentation and settling of the influent. The water is pumped to the reactor in a programmed way at the beginning of a cycle. Its operation is not affected by the hourly discontinuity of the influent flow. It decants part of the solids and also anaerobically degrades the accumulated organic matter.
2 - Biological clarifier reactor: The treatment sequences are as follows:
Filling: reception of a certain volume of water from the primary settling tank by pumping.

Technical Specifications